Marvelous Info About How To Clean Amplifier Pots

Fix your scratchy pots and knobs on all your guitar gear with this stuff.

How to clean amplifier pots. To fix scratchy amp pots, you’ll need to get a contact cleaner like deoxit to spray inside the pots. The idea is to clean it out and leave a little lubricant, but not leave it all gunked up inside, which can. Wrap or cover the surrounding area with a paper towel to catch the overspray.

Helpful hint when spraying cleaner into the pots: If the dirt is coming from the input jacks, try cleaning them with a cotton swab dipped in. Next, flush it out with the cleaner.

Once the switch cleaner has been applied, work the pot or switch back and forth vigorously. It’s safe to use on electronics because it dries quickly. Let everything dry for a few.

With your amp off 1.unplug your amp 2.lay it gently on it's back so the eq and controls are facing up. Once you have that, you’ll need to spray. Clean out your pots, input jack, switches, and tube pins with a.

Open the amp up and spray into the holes in the sides of the pots while simultaneously rotating them through their full range of rotation. I took apart the amp and used contact cleaner to spray the dirt and crud f. Spray the contact cleaner on each pot/knob, you don't really even.

Using a soft bristled brush or. Work the knob back and forth a few times. Is it coming from the input jacks, the volume or tone pots, or something else?